CCIE R&S Roadmap Topics - Section 2

There are ten sections on the CCIE Routing and Switching v4.0 Blueprint:

Section 2 topics are outlined in this document, which is one of a set of six documents that correlates CCIE R&S Blueprint v4.0 from the Cisco Learning Network DOC-4375 "CCIE Routing and Switching Lab Exam Topics (Blueprint) v4.0" with the expanded topic list from the DOC-6864 "CCIE Routing and Switching Lab Exam Checklist".

Numbering and topics from the DOC-4375 blueprint are shown in blue, numbering and expanded topics from the DOC-6864 checklist are shown in red. When the topic appears on both blueprints, it is shown in purple.

2


2

Implement IPv4

2.1



Implement IP version  4 (IPv4) addressing, subnetting, and variable-length subnet masking (VLSM)



2.1.

IPv4 Addressing



2.1.1.

IPv4 Addressing



2.1.2.

IPv4 Subnetting



2.1.3.

IPv4 VLSM

2.2



Implement IPv4  tunneling and Generic Routing Encapsulation (GRE)

2.3



Implement IPv4 RIP version 2 (RIPv2)

2.4


2.2.

Implement IPv4 Open Shortest Path First (OSPF)
OSPFv2


a


Standard OSPF areas


b

2.2.06.

Stub area


c

2.2.07.

Totally stubby area


d

2.2.08.

Not-so-stubby-area (NSSA)



2.2.09.

NSSA and Stub Areas


e


Totally NSSA



2.2.10.

NSSA and Totally Stubby Areas


f


Link-state advertisement (LSA) types


g


Adjacency on a point-to-point and on a multi-access network



2.2.01.

OSPF on a Broadcast Multicast Access Network (Ethernet)



2.2.02.

OSPF over a Frame Relay Multipoint Network by Changing Network Types



2.2.03.

OSPF over a Frame Relay Multipoint Network by Using the neighbor Command



2.2.04.

OSPF over a Frame Relay Point-to-Point Network



2.2.05.

Virtual Links


h


OSPF graceful restart

2.5


2.3.

Implement IPv4 Enhanced Interior Gateway Routing Protocol (EIGRP)



2.3.1.

Basic EIGRP


a


Best path


b


Loop-free paths


c


EIGRP operations when alternate loop-free paths are available, and when they are not available


d


EIGRP queries


e


Manual summarization and autosummarization


f


EIGRP stubs



2.3.3.

EIGRP Stub on Routers and Switches



2.3.2.

Passive Interfaces



2.3.4.

EIGRP Update—Bandwidth Control



2.3.5.

Changing the Administrative Distance of EIGRP



2.3.6.

Unequal-Cost Load Balancing for EIGRP

2.6



Implement IPv4 Border Gateway Protocol (BGP)


a


Next hop



2.5.

IBGP



2.5.3.

Next-Hop Attribute


b


Peering



2.5.1.

IBGP Peering



2.6.1.

EBGP Peering



2.6.2.

EBGP Peering Based on Loopbacks


c


Internal Border Gateway Protocol (IBGP) and External Border Gateway Protocol (EBGP)



2.5.2.

Advertising Routes in BGP



2.5.4.

Route Reflectors



2.5.5.

Redundancy by Neighbor Relationships Based on Loopbacks



2.6.

EBGP



2.7.

BGP Advanced Features



2.7.01.

Filtering Using ACLs



2.7.02.

Filtering Using Prefix Lists



2.7.03.

Filtering Using AS Path Filters



2.7.04.

Redistributing Connected Routes into BGP



2.7.05.

Redistributing Dynamic Routing Protocols into BGP



2.7.06.

BGP Aggregation



2.7.07.

BGP Aggregation with the Summary Only Parameter



2.7.08.

BGP Aggregation with Suppress Maps



2.7.09.

BGP Aggregation with Unsuppress Maps



2.7.10.

BGP Best-Path Selection – Weight



2.7.11.

BGP Best-Path Selection – Local Preference



2.7.12.

BGP Best-Path Selection – MED



2.7.13.

BGP Communities – No-Export



2.7.14.

BGP Communities – No-Advertise



2.7.15.

BGP Confederation



2.7.16.

BGP Local AS



2.7.17.

Working with Private AS Numbers



2.7.18.

Route Dampening



2.7.19.

Conditional Advertising



2.7.20.

Peer Groups

2.7



Implement policy   routing

2.8


2.8

Implement Performance Routing (PfR) and Cisco Optimized Edge Routing (OER)

2.9



Implement filtering, route redistribution, summarization, synchronization, attributes, and other advanced features



2.4.

Filtering, Redistribution, and Summarization



2.4.01.

Route Filtering for OSPF Within the Area Using a Distribute List with an ACL and Prefix Lists



2.4.02.

Route Filtering for OSPF Between Areas



2.4.03.

Summarization of OSPF Routes Between Areas



2.4.04.

Summarization of External Routers Within OSPF



2.4.05.

Filtering with a Distribute List Using an ACL and Prefix Lists



2.4.06.

Using Advanced ACLs and a Prefix List for Filtering Routes



2.4.07.

Summarizing Routes with EIGRP



2.4.08.

Route Summarization for RIP



2.4.09.

Redistribution Between OSPF and EIGRP



2.4.10.

Redistribution Between RIP and EIGRP



2.4.11.

Redistribution Between RIP and OSPF



2.4.12.

Redistribution of Directly Connected Routes



2.4.13.

Redistribution of Static Routes



2.4.14.

Redistribution with Filtering Using ACLs and Prefix Lists



2.4.15

Redistribution with Filtering Using Route Tagging

 

_____________________________________________________________________________________________

icon PDF of Combined RS Topics from DOC-4375 and DOC-6864

icon Excel File of Combined RS Topics from DOC-4375 and DOC-6864